About Infinity Seam
Infinity Seam is a two-part methacrylate (MMA) adhesive from Infinity Bond designed for bonding to solid surface, quartz, granite & marble, ceramic, sintered stone, and other engineered countertops and surfaces.
Infinity Seam is available in hundreds of colors, making it possible to match virtually any surface out there. It cures quickly, providing an even, consistent bond, and is ready for sanding and routing in 30 minutes.
Features
- Modern adhesive chemistry with more bite
- Very consistent flowability, toughness, and curing
- Available in flowable or non-sag viscosity
- Requires minimal surface prep
- UV stable, does not yellow over time
- Excellent weather resistance
- Low VOCs
- 12 month shelf life
- Made in the USA
Standard vs. Dripless
Standard is the more common, flowable version of Infinity Seam, with a viscosity similar to thick pancake syrup that easily fills gaps. Most fabricators will be familiar with glue of this viscosity. However, we recommend testing out the Dripless version. Many fabricators find that it's nicer to work with and delivers equally great results.
Dripless is the non-sag version of Infinity Seam, with a viscosity similar to toothpaste. It stays where you put it, meaning less glue on the ground, on your hands, and on your tools. That can also mean using half as much glue, saving you even more money in the long run.
Cartridges
Infinity Seam comes in a cartridge containing two adhesive components that combine at a 10:1 ratio. The components get mixed when the adhesive is dispensed from the cartridge through a static mixing nozzle or tip.
Infinity Seam uses high quality 250 ml cartridges from Sulzer Mixpac. These are industry standard and compatible with all dispensers that accommodate 200 ml 10:1 cartridges.
Mixing Nozzles / Tips
Infinity Seam cartridges have an F-system connection for static mixing tips, which is also industry standard.
Two mixing tips are included with each Infinity Seam cartridge. The included mixers are Swiss-designed Sulzer MFQX nozzles. These do a much better job than the cheap mixers included with other seaming adhesives, ultimately leading to a stronger, more reliable bond.
Specifications
| Property |
Value |
|
Mix Ratio
|
10:1 |
| Working Time |
8 - 12 minutes @ 75°F / 24°C |
| Fixture Time |
20 - 25 minutes @ 75°F / 24°C |
| Handling Strength |
30 minutes |
| Operating Temperature |
65°F - 85°F (18°C - 30°C) |
| Gap Filling |
0.250 inches |
| Mixed Density |
8.1 lbs/gal (.96 g/cc) |
| Flash Point |
51°F (11°C) |
Data Sheets
